Laguna LED Chameleon 95CRI Woodturners Lathe Lamp

The new Chameleon LED Lathe light with 95 CRI is optimized for the best possible lighting. With the LED benefits of long life, low power consumption, and low heat emission; the Laguna LED line are the best machine lamps available.

Features:

  • Chameleon Color (Temperature) Control
  • Brightness Control
  • Casted Impact Resistant Heads
  • Shadow Diffusing Lens

Description

 

Bulb Wattage: 14 Watt

Bulb Angle: 60

Illuminance*: 0-720

Service Life: 50,000 Hours

Controls: Illuminance, Temperature, Power

*Measurement taken at full brightness from 1 meter from light source. For reference, an iPhone X LED light was measured at 49.8 lumens

Materials

Lens: Diffused Glass

Head: Casted Alloy

Arm: Aluminum

Base: Casted Alloy

Features

  • 80, 90, 95 CRI are color rendering indexes. This index is used to compare artificial light sources to that of natural light that we perceive through our eyes on a sunny clear day. The higher the CRI, the more real things will look when shined upon.
  • Chameleon Color (Temperature) Control allows the user to tune the environment with the best lighting possible. Poor lighting in a workspace can distort colors, reflect poorly, and cause shadows that make the details fade. The Chameleon Color control is technology taken down from surgeons and doctors that we thought would be very useful for the makers. *Standard on Woodturners and Machinist Lamps
  • Full Brightness Control works in unison with the Chameleon color control allowing the user to further tune the lighting environment. *Standard on Woodturners and Machinist Lamps
  • Casted Impact resistant heads are protecting us for the 2-year warranty we offer on these lights. The heads are water and dust resistant and can withstand a punch well enough for military standards.
  • Shadow Diffusing Lens make the shadows less crisp and noticeable. An undiffused light will cast a shadow with crisp lines, adding distractions. The diffusing lenses gives a more natural and pleasing light.
  • Multiple Join Design. Solid joints are used to allow the user to move the light wherever it needs to be. These joints can easily be tightened and loosened as desired and are prepped with Loctite prior to shipping. The Spinlock light features a sturdy spine that locks into place wherever it is. It does not move.
  • 50,000 hour service life (5.7 Years). This means you can turn the light on, and leave it on, for 5.7 years before the bulb dies. This is because LED technology is very efficient, will not get hot, and uses very little electricity to operate.
  • 100-240V LED Driver, 110V plug included. Another crucial component to longevity of the light is the driver. Our drivers allow for a voltage input anywhere from 100V to 240V and are equipped standard with a 110V 5-15 plug. This means that if you need 208V or 220V you can simple cut the plug and rewire it to the receptacle.
  • Low Heat & Energy COnsumption. Based on recent electricity data, the 14W Chameleon lights will only cost $2.56 a year if used for 5 hours every day. Compare this to a typical Halogen Machine light, the cost is up to ten times that, and that is not included replacement bulbs or possible fire hazards.

Dimensions

Maximum Reach: 48″

Left or Right Range: 43″

Head Dimensions: 12″ x 3″

Base Tapping: 60mm x 60mm x 60mm x 60mm

Packaged Dimensions (W x L x H): 12″ x 25″ x 4″

Assembled Dimensions (W x L x H): 4″ x 28″ x 26″

Packaged Weight: 5 lbs

Assembled Weight: 4 lbs

Electrical: 100-240V/1PH/60Hz

Consumable Spec: Bulb – 14W LED

Where To Buy?

ONLINE DEALERS | DEALER LOCATOR BELOW

DEALER LOCATOR